RAM Mount U-Bolt Handlebar Motorcycle Mount for 10" Tablets using Heavy Case

This a full kit that will allow you to mount an iPad (with a heavy duty case) onto a handlebar rail.

The RAM-B-149Z-TAB8U consists of the following RAM (B Size) components:

• 1 x RAM Tab-Tite™ Universal Spring Loaded Cradle 10" Tablets WITH HEAVY DUTY CASE
• 1 x RAM 2.5" Round Base with AMPs Hole Pattern and 1" Ball
• 1 x Double Clamp Arm (Length of your choice - See below)
• 1 x U-Bolt Rail Base

---

RAM Tab-Tite™ Universal Spring Loaded Cradle 10" for Tablets WITH HEAVY DUTY CASE

Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle.

Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.

Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet.

The included backplate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the backplate for support of your new tablet.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Holder Dimensions

• Height: 9" to 11.5"
• Width: 6.38" to 8.31"
• Depth: 0.13" to 1.12"

May not be suitable for some other tablets or devices - please check dimensions first.

---

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm

---

RAM U-Bolt Rail Base (RAM-B-231ZU)

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail.

The Zinc coated metal u-bolt accommodates rails in diameter from 1.27cm (0.5") to 3.18cm (1.25") in diameter.

Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

---

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.