RAM Mount U-Bolt Handlebar Motorcycle Mount for 10" Tablets

RAM Mount for an iPad 1, 2, 3 or 4 with or without a case, skin or sleeve onto a handlebar rail.

The Handlebar, Rail or wheelchair bar mount consists of

• 1 x RAM Tab-Tite™ Cradle for the Apple iPad 1-4 WITH OR WITHOUT LIGHT DUTY CASE
• 1 x RAM 2.5" Round Base with AMPs Hole Pattern and 1" Ball
• 1 x Double Clamp Arm (Length of your choice - See below)
• 1 x U-Bolt Rail Base

---

RAM Tab-Tite™ Cradle for the Apple iPad 1-4 WITH OR WITHOUT LIGHT DUTY CASE

The Tab-Tite spring loaded back plate and custom support cups makes it easy to load and unload your tablet, along with keeping it secure while on the go.

Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports.

The included backplate is interchangeable with various size support cups, making it compatible with numerous tablet models.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Holder Dimensions

• Height: 8.5" to 11.125"
• Width: 6.38" to 7.75"
• Depth: 0.13" to 0.56"

Compatible Devices

• Apple iPad Generations 1 - 4

May not be suitable for some other tablets or devices - please check dimensions first.

---

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm

---

RAM U-Bolt Rail Base

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail.

The Zinc coated metal u-bolt accommodates rails in diameter from 1.27cm (0.5") to 3.18cm (1.25") in diameter.

Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

---

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.