RAM Mount Motorcycle Handlebar 10" Tablet Mount Heavy Duty Case ATV Strap

This a full kit to mount an iPad Using a heavy duty case) onto a handlebar rail.

RAM Tab-Tite™ Universal Spring Loaded Cradle 10" Tablets WITH HEAVY DUTY CASE

Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle.

Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.

Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports,

The included backplate is interchangeable with various size support cups, making it compatible with numerous tablet models.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Holder Dimensions

• Height: 9" to 11.5"
• Width: 6.38" to 8.31"
• Depth: 0.13" to 1.12"

The kit consists of the following RAM (B Size) components:

• 1 x RAM Tab-Tite™ Universal Spring Loaded Cradle 10" Tablets WITH HEAVY DUTY CASE
• 1 x RAM Diamond Base with 1" Ball
• 1 x Double Clamp Arm (Length of your choice - see below)
• 1 x RAM V Shape Rail Base 1" Ball with Metal Strap

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A)        Overall Length: 6cm        Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U)    Overall Length: 9cm        Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C)          Overall Length: 15cm      Socket-To-Socket Length: 13.5cm

RAM V Shape Rail Base 1" Ball with Metal Strap

The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a V-Shaped base, with two sized length metal straps.

The RAM-B-108BU accommodates rails from 2.55 cm to a maximum of 5.3 cm in diameter.

Included in RAM-B-108BU Kit

• 1 x 15.3cm long metal strap
• 1 x 20.3cm long metal strap
• 1 x 14cm rubber strip that supports the metal straps to avoid scratching or marking of the rail.

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Any device shown is for illustration purposes only and is not included in purchase.