RAM Mount iPhone 6 Plus Glare Shield Golf Cart Airplane Shield Mount

The RAM-B-177-UN10U is a full kit that will allow you to mount a range of large smart phones and phablets onto the edge of a flat surface.

---

The RAM-B-177-UN10U consists of the following RAM (B Size) components:

• 1 x RAM Universal X-Grip® Large Phone/Phablet Cradle (RAM-HOL-UN10BU)
• 1 x RAM SHORT Size Double Clamp Arm (RAM-B-201U-A)
• 1 x RAM 1" x 1" Glareshield Clamp Base with 1" Ball (RAM-B-259U)

RAM Universal X-Grip® Large Phone/Phablet Cradle (RAM-HOL-UN10BU)

The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic.

The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved.

Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.

The X-Grip® includes a device tether recommended for outdoor applications.

The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions

• Minimum Width = 1.75" (Minimum Height = 5.5")
• Maximum Width = 4.5" (Minimum Height = 3.25")
• Depth = 0.875"

May not be suitable for some other iPhone models or devices - please check dimensions first.

---

Compatible Devices & Models

• iPhone 6 Plus
• Samsung GALAXY Note and Note 2, 3, 4 & 5 models
• Samsung GALAXY Mega 5.8 & 6.3
• HTC Desire 816
• Nokia Lumia 920

Not suitable for iPhone 6 or some Samsung series.

---

RAM Double Socket Clamp Arm

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm

---

RAM 1" x 1" Glareshield Clamp Base with 1" Ball (RAM-B-259U)

The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 5/8" thick.

Popular mounting edges include a car side window edge lip or glare shield on an airplane.

The base has two composite bolts that, when tightened, clamp the base to the lip surface.

A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application.

---

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.