RAM Mount Motorcycle Center Fork Stem Phone Mount for Small iPhones - RAM-B-176-UN7U

This a full kit to mount a range of phone models onto a motorcycle using the hollow centre fork stem of the bike.

---

The kit consists of the following RAM (B Size) components:

• 1 x RAM Universal X-Grip® Cell/iPhone Cradle (RAM-HOL-UN7BU)
• 1 x RAM Double Clamp Arm (Length of your choice - See below)
• 1 x RAM Motorcycle Fork Stem Base with 1" Ball

---

RAM Universal X-Grip Cell/iPhone Cradle

The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.

The X-Grip® includes a device tether recommended for outdoor applications.

The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

---

Cradle Dimensions

• Minimum Width = 1.875" (Minimum Height = 4.25")
• Maximum Width = 3.25" (Minimum Height = 2.25")
• Depth = 0.875"

---

Compatible Phone Models

• Apple iPhone 14, 14 Pro, 13, 13 Pro, 13 Mini, 12, 12 Pro, 12 Mini, 11, 11 Pro, XR, XS, X, SE, 8, 7, 6, 5, 5S, 5C, 4S
• Samsung Galaxy S22 5G, S22+ 5G, S20, S20+, S10, S10+, S9, S9+, S7, S6, S5, S4, S3, S2  
• Google Pixel 6 Pro, 6, 5, 4a, 4XL, 4, 3a, 3, 2, XL, 1
• A range of Sony Xperia, LG, Huawei, Motorola etc phones - send us a message to confirm or check dimensions of your phone against measurements above.
• NB: May support an iPhone Plus, Max or Pro Max phone if NOT using a case - check dimensions above.

---

RAM Double Socket Clamp Arm (Select length prior to checkout);

• SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
• STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
• LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm

---

RAM Motorcycle Centre Fork Stem Base

The RAM Motorcycle Fork Stem is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 - 20mm and 28mm or .5" - 1.10" at the following intervals:

NOTE: It is STRONGLY suggested that you watch the instructional "How To" video BEFORE attempting to install this part. Attempting to install the product without the correct measurement information will render the product unusable. Please view the video at the bottom of this page. 

---

** This listing includes one double socket Clamp Arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.

HOW TO INSTALL