RAM Mount Car Headrest Rail Mount 10" Tablets using Case

RAM Mount Headrest Rail Mount and cradle for 10" Tablets using Heavy Duty Case

What you Get:

• 1 x RAM Tab-Tite™ Universal Spring Loaded Cradle for 10" Tablets (with heavy duty case)
• 1 x RAM 2.5" Round Base with the AMPs Hole Pattern & 1" Ball
• 1 x RAM STANDARD Length Double Clamp Arm
• 1 x RAM Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball

---

RAM Tab-Tite™ Universal Spring Loaded Cradle for 10" Tablets (heavy duty case NOT INCLUDED)

Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle.

With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit.

This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.

Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below.

It is important to verify the dimensions of your tablet when determining the overall size.

---

Cradle Dimensions:

• Height = 9" to 11.5"
• Width: 6.38" to 8.31"
• Depth: 0.13" to 1.12"

May not be suitable for some other tablets or devices - please check dimensions first.

---

RAM Double Socket Clamp Arm;

• STANDARD (RAM-B-201U)| Overall Length: 9cm | Socket-To-Socket Length: 7.6cm

---

RAM Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball

The RAM Torque™ bar mount has a 1" rubber ball and accommodates rails 3/8" to 5/8" in diameter.

Sizing inserts are included to provide a snug fit and protection of the rail.

The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.

The RAM-B-408-37-62U allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions.

Rail Mount Dimensions:

• Accommodates rails 3/8" to 5/8" in diameter

---

* RAM have 5 varieties of the TORQUE rail mount, it is the BUYERS responsibility to SELECT the correct B size 1 " Ball or C size 1.5" ball and correct rail DIMENSION. We will work with you to exchange any INCORRECT SELECTION, buyers will however be responsible for return postage both ways.

** Device shown for illustration purposes only and is not included in purchase.